TO BAKE OR ROAST
3 | PUSH WHEN | TURNTO | 2 |
|
| Q | |
QFINISHED | SET TEMP |
TIMER CLOCK s:M4’ CLEAN FE; BROIL BAKE
mmmmmm
F
PUSH 6 1
The red display will show the oven temperature as it rises (in 5” steps).
A tone will sound when the oven is ready.
DELAYED | BAKE CYCLE |
|
TURN TO | TURN TO | TURN TO |
SET LENGTH | SET TEMP | SET OVEN |
SET
|
| J | |
TIMER CLOCK s:M4’ | CLEAN ;y$; | BROIL BAKE | |
|
| ||
mm |
| ||
F |
| , | |
6 | 6 | ||
d | |||
PUSH | PUSH | PUSH |
When cook time has ended, a tone will sound and the oven will turn off.
AUTOMATIC OVEN OFF
TURN TO SET
Q
ANCEL | ’ | J |
| TIMER CLOCK s:M9’ CLEAN ;‘E” | BROIL BAKE |
|
|
6 PUSH @ PUSH
The ERC will calculate when to turn the oven off.
When the stop time is reached, a tone will sound and the oven will turn off I
TO USE THE TIMER
TURN TO
SET AMOUNT 02
OF TIME \
TIMER CLOCK ;;M4’ CLEAN ;‘E” BROIL BAKE
HOLD
3 SECONDS TO CANCEL
A tone will sound when time is up.
NOTE: The timer is a reminder only and will not operate
INCOMPLETE OR INCORRECT SETTINGS
1.Attention Tone will sound if oven has only been partially programmed. For example, if you have selected a cook time but no temperature, you will hear the Attention Tone until you select a temperature or push CANCEL.
2.Function Error Tone will sound if there is a problem with one of the range functions. Cancel the tone by pushing the CANCEL button. If the tone starts again, call for service.
RECALLING FUNCTIONS
You may recall any set function by pushing the button of that function.
CANCELLING TONES
If you prefer that your range not have a tone whenever you push a button, you can eliminate those tones by pushing and holding the CANCEL button until you hear a beep. Repeat to activate tones again.
PREHEATING FOR AUTOMATIC OVEN OPERATIONS
Cook times programmed for automatic oven operations start counting down when the oven first comes on, not when it has reached the set temperatures. It takes 10 to 15 minutes to reach the set temperature, thus additional cook time may be necessary.
10CCTLOl-7