Roper D975 owner manual Lift-Upcooktop, Removable Oven Racks, Removable Oven Door

Models: D975

1 26
Download 26 pages 16.59 Kb
Page 21
Image 21
LIFT-UP COOKTOP

LIFT-UP COOKTOP

The cooktop can be raised so the area underneath can be cleaned.

Raise the front of the cooktop until the support rods snap into position to hold the cooktop.

To lower cooktop, push in on the front of the supports while lowering top.

Porcelain enamel can chip. Handle porcelain enameled cooktops carefully.

REMOVABLE OVEN RACKS

Be careful not lo scratch the oven finish when installing or removing oven racks.

To install:

1.Set the raised back edge of the rack on a pair of rack guides.

2.Push the rack in until you reach the bump in the rack guide, then lift the front of the rack a btt and push the rack all the way in

To remove:

1.Pull the oven rack out, then up.

REMOVABLE OVEN DOOR

To remove:

1.Open the doorto the broil stop position (see illustration).

2.Grasp the doorat each side and lift up and off the hinges.

NOTE: When the door is removed and hinge arms are at stop position, do not bump or try to move the hinge arms. The hinges could snap back causing an injury to the hands ordamage to the porcelain on the front of the oven. Cover the hinges with toweling or empty towel rolls while working in the oven area.

To replace:

1. Hold the doorover the hingeswith the slots at the bottom edge of the door lined up with the hinges. The hinge arms must still be in the stop position.

2. Slide the door down onto the hinges as far as it will go

and close the door.

STOP POSITION

19

Page 21
Image 21
Roper D975 owner manual Lift-Upcooktop, Removable Oven Racks, Removable Oven Door