Watching Video

To Watch a DVD:
1 Press EJECT twice to remove
any loaded disc.
2 Insert a DVD onto the slot, label side up.
3 Most DVD discs begin playback
automatically. If a menu appears,
press PLAY or ENTER as instructed on screen.
To Watch Broadcast Television (with optional TV tuner):
1 Press SOURCE until “TV Tuner “ and a channel number (for
example, “2” ) appear on the screen. If no channel number
appears, press the POWER button on the remote.
2 To change channels, press NEXT or PREVIOUS on the front
panel, or UP CH and DOWN CH on the remote.

Switching On, Lowering and Adjusting the Screen

Use the system only when the vehicle is running, or with the
ignition key switch in the “accessory” position.
GETTING STARTED
ENTER
OPEN
SOURCE
Second,
to adjust the
screen angle,
gently pull the
screen towards
you an inch or so,
and hold it there
with one hand.
Third,
while holding the
screen, move the
adjuster slider
left or right with
your other hand.
Finally, let go of the screen and double-check the viewing angle.
You may need to repeat this process a few times to get the angle
just right for your height and the height of the vehicle seats.
First, press the OPEN button on the front panel,
or on the remote. The screen will deploy.
Note: While a disc is playing, the Stop/Eject button on the front
panel acts as a Stop button. To eject a disc while it is playing, press
the Stop/Eject button twice in quick succession. The Eject button
on the remote should always eject the disc immediately.