Wireless Adapter | User Manual | |
|
|
|
D. Network Type : There are two types, infrastructure and 802.11
E. RTS Threshold : User can adjust the RTS threshold number by sliding the bar or key in the value directly. The default value is 2347.
F. Fragment Threshold : User can adjust the Fragment threshold number by sliding the bar or key in the value directly. The default value is 2346.
G. Channel : Only available for setting under
H. Authentication Type : There are 7 type of authentication modes supported by RaUI. They are open, Shared, LEAP, WPA and
I..Encryption Type : For open and shared authentication mode, the selection of encryption type are None and WEP. For WPA, WPA2,
J. 802.1x Setting : This is introduced in the topic of "Section
K. WPA
L. WEP Key : Only valid when using WEP encryption algorithm. The key must matched AP's key. There are several formats to enter the keys.
1.Hexadecimal - 40bits : 10 Hex characters.
2.Hexadecimal - 128bits : 26Hex characters.
3.ASCII - 40bits : 5 ASCII characters.
4.ASCII - 128bits : 13 ASCII characters.
- 29 -