Rosewill RNX-G300EXLX user manual Link Status, Wireless Adapter RNX-G300EX/LX

Wireless Adapter RNX-G300EX/LX User Manual

LINK STATUS

Figure 2-9 is the link status page, it displays the detail information current connection.

Figure 2-9 Link Status function

A. Status : Current connection status. If no connection, if will show Disconnected. Otherwise, the SSID and BSSID will show here.

B. Extra Info : Display link status in use.

C. Channel : Display current channel in use.

Authentication : Authentication mode in use.

D. Encryption : Encryption type in use.

E. Network Type : Network type in use.

IP Address : IP address about current connection.

F. Sub Mask : Sub mask about current connection.

G. Default Gateway : Default gateway about current connection.

H. Link Speed : Show current transmit rate and receive rate.

I.Throughout : Display transmits and receive throughput in unit of Mbps.

J.Link Quality : Display connection quality based on signal strength and TX/RX packet error rate.

K.Signal Strength 1 : Receive signal strength 1, user can choose to display as percentage or dBm format.

L.Signal Strength 2 : Receive signal strength 2, user can choose to display as percentage or dBm format.

M.Signal Strength 3 : Receive signal strength 3, user can choose to display as percentage or dBm format.

N.Noise Strength : Display noise signal strength.

O. HT : Display current HT status in use, containing BW, GI, MCS, SNR0, and SNR1 value. (Show the information only for 802.11n wireless card.)

- 77 -