Rosewill RNX-G300EXLX user manual Wireless Adapter RNX-G300EX/LX

Wireless Adapter RNX-G300EX/LX User Manual

A. A successful PBC Configuration :

Start PBC connection ~> Scanning AP ~> Begin associating to WPS AP ~> Associated to

WPS AP ~> Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~> Receive EAP-Rsp (Start)

~> Sending M1 ~> Received M2 ~> Sending M3 ~> Received M4 ~> Sending M5 ~> Received M6 ~> Sending M7 ~> Received M8 ~> Sending EAP-Rsp (Done) ~> Configured

~> WPS status is disconnected ~> WPS status is connected successfully-SSID

B. No PBC AP available :

Scanning AP ~> No PBC AP available ~> Scanning AP ~> No PBC AP available ~>...

C. Too Many PBC AP available :

Scanning AP ~> Too Many PBC AP available ~> Scanning AP ~> Too Many PBC AP

available ~>...

D. WPS configuration doesn't complete after two-minute connection : WPS Eap process failed.

E. When Errors occur within two-minute connection, the WPS status bar might report on" WPS Eap process failed".

Error messages might be :

1.Receive EAP with wrong NONCE.

2.Receive EAP without integrity.

3.An inappropriate EAP-FAIL received.

Describe "Multiple PBC session overlaps" as follow :

A. Dual bands :

AP1 is a G-Band AP using PBC mode. (ID = 0x0004) AP2 is a A-Band AP using PBC mode. (ID = 0x0004) They have the same UUID-E.

STA would regard these two APs as a dual-radio AP and select one band to connect.

B. Different UUID-E :

AP1 is a G-Band AP using PBC mode. (ID = 0x0004) AP2 is a G-Band AP using PBC mode. (ID = 0x0004) They have the different UUID-E.

STA would regard these two APs as two different APs and wait until only one PBC AP is available.

- 73 -