Wireless Adapter | User Manual | |
|
|
|
ADVANCED
Figure
Figure
A. Wireless mode : Select wireless mode. 802.11 B only, 802.11 A only, 802.11 B/G mix, 802.11 B/G/N mix, 802.11 A/B/G mix, and 802.11 A/B/G/N mix modes are supported.
(802.11 A/B/G mix selection item only exists for A/B/G adapter ; 802.11 B/G/N mix selection item only exists for B/G/N adapter ; 802.11 A/B/G/N mix selection item only exists for
A/B/G/N adapter)
B. Wireless Protection : User can choose from Auto, On, and Off. (only 802.11n adapter don't support.)
C. TX Rate : Manually force the Transmit using selected rate. Default is auto.
(802.11n wireless card don't support TX Rate now)
D. Enable TX Burst : Ralink's proprietary frame burst mode.
E. Enable TCP Window Size : Enhance throughput.
F. Fast Roaming at : fast to roaming, setup by transmit power.
G. Select Your Country Region Code : eight countries to choose. Country channel list : Country channel list. (11A ListBox only shows for A/B/G adapter.)
H. Show Authentication Status Dialog : When you connect AP with authentication, choose whether show "Authentication Status Dialog" or not. Authentication Status Dialog display the process about 802.1x authentication.
I.Enable CCX (Cisco Compatible eXtensions) : support Cisco Compatible Extensions function.
J.Apply the above changes.
- 46 -