Wireless Adapter | User Manual | |
|
|
|
A. Authentication Type : There are three type of authentication modes supported by RaConfig. They are open, Shared,
B. Encryption Type : For open and shared authentication mode, the selection of encryption type are None and WEP. For WPA, WPA2,
C. Config Methods : Correspond to the methods the AP supports as an Enrollee for adding external Registrars. (a bitwise OR of values)
Value | Hardware Interface |
0x0001 USBA (Flash Drive)
0x0002 Ethernet
0x0004 Label
0x0008 Display
0x0010 External NFC Token
0x0020 Integrated NFC Token
0x0040 NFC Interface
0x0080 Push Button
0x0100 Keypad
D. Device Password ID : Indicate the method or identifies the specific password that the selected Registrar intends to use. AP in PBC mode must indicate 0x0004 within
Value Description
0x0000 Default (PIN)
0x0001
0x0002 Rekey
0x0003 Display
0x0004 PushButton (PBC)
0x0005
E. Selected Registrar : Indicate if the user has recently activated a Registrar to add an Enrollee. The values are "TRUE" and "FALSE".
F. State : The current configuration state on AP. The values are "Unconfigured" and "Configured".
G. Version : WPS specified version.
H. AP Setup Locked : Indicate if AP has entered a setup locked state.
I.
J.RF Bands : Indicate all RF bands available on the AP. A
- 62 -