Rosewill RNX-G300EXLX Auth. \ Encry. Setting - Wep/Tkip/Aes, Wireless Adapter RNX-G300EX/LX

Wireless Adapter RNX-G300EX/LX User Manual

AUTH. \ ENCRY. SETTING - WEP/TKIP/AES

Auth. \ Encry. Setting, shown as Figure 3-1.

Figure 3-1 Auth. \ Encry. Setting

A. Authentication Type : There are 7 type of authentication modes supported by RaUI. They are open, Shared, LEAP, WPA and WPA-PSK, WPA2 and WPA2-PSK.

B. Encryption Type : For open and shared authentication mode, the selection of encryption type are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK authentication mode, the encryption type supports both TKIP and AES.

C. 8021X : This is introduced in the topic of Section 3-2.

D. WPA Pre-shared Key : This is the shared secret between AP and STA. For WPA-PSK and WPA2-PSK authentication mode, this field must be filled with character longer than 8 and less than 32 length.

E. WEP Key : Only valid when using WEP encryption algorithm. The key must matched

AP's key. There are several formats to enter the keys.

E-1. Hexadecimal - 40bits : 10 Hex characters.

E-2. Hexadecimal - 128bits : 32Hex characters.

E-3. ASCII - 40bits : 5 ASCII characters.

E-4. ASCII - 128bits : 13 ASCII characters.

**Powered by Meetinghouse.

- 78 -