Getting Started
Thank you for purchasing the Rotel RB-1510 Stereo Power Amplifier. When used in a high quality music or home theater system, your Rotel amplifier will provide years of musical enjoyment.
The RB-1510 is a high-power, two-channel power amplifier, providing the highest level of audio performance. A massive power supply, premium components, and Rotel’s Balanced Design ensure superb sound quality. High current capability allows the RB-1510 to drive the most demanding loudspeakers.
Be aware that the RB-1510 is capable of high power levels, in excess of 65 watts per channel. Make sure that your speakers can handle the power of the RB-1510. If in doubt about your speakers, ask your local Rotel audio dealer for advice.
The RB-1510 is straightforward in its installation and operation. If you have experience with other stereo power amplifiers, you shouldn’t find anything perplexing. Plug in a pair of high-quality RCA cables from your preamp into the amplifier inputs, wire up your speakers, and enjoy.
A Few Precautions
Please read this manual carefully. In addition to basic installation and operating instructions, it provides valuable information on various RB-1510 system configurations as well as general information that will help you get optimum performance from your system. Please contact your authorized Rotel dealer for answers to any questions you might have. In addition, all of us at Rotel welcome your questions and comments.
Save the RB-1510 shipping carton and all enclosed packing material for future use. Shipping or moving the RB-1510 in anything other than the original packing material may result in severe damage to your amplifier.
Fill out and send in the owner’s registration card packed with the RB-1510. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is ever required.
Cables
Be sure to keep the power cords and audio signal cables in your installation away from each other. This will minimize the chance of the regular audio signal cables picking up noise or interference from the power cords. Using only high quality, shielded cables will also help to prevent noise or interference from degrading the sound quality of your system. If you have any questions see your authorized Rotel dealer for advice about the best cable to use with your system
AC Power and Control
AC Power Input -
Because of its high power rating, the RB-1510 can draw considerable current. Therefore, it should be plugged directly into a 2-pin polarized wall outlet. Do not use an extension cord. A heavy duty multi-tap power outlet strip may be used if it (and the wall outlet) is rated
to handle the current demanded by the RB-1510 and all the other components connected to it.
Be sure the Power Switch 1 on the front panel of the RB-1510 is turned off (in the out position). Then, connect the supplied power cord to the Power Connector - on the back panel of the amplifier and to the AC power outlet.
Your RB-1510 is configured at the factory for the proper AC line voltage in the country where you purchased it (either 120 volts AC or 230 volts AC with a line frequency of either 50 Hz or 60 Hz). The AC line configuration is noted on a decal on the back panel.
Note: Should you move your RB-1510 amplifier to another country, it is possible to reconfigure your amplifier for use on a different line voltage. Do not attempt to perform this conversion yourself. Opening the enclosure of the RB-1510 exposes you to dangerous voltages. Consult a qualified service person or the Rotel factory service department for information.
If you are going to be away from home for an extended period of time such as a month-long vacation, it is a sensible precaution to unplug your amplifier (as well as other audio and video components) while you are away.
