Ruby Tech GS-1224L manual Network, Subnet, bits All 0s = All 1s=, User Manual, 128.1.2.128/25

Models: GS-1224L

1 117
Download 117 pages 59.57 Kb
Page 28
Image 28
128.1.2.128/25

User Manual

Class D and E:

Class D is a class with first 4 MSB (Most significance bit) set to 1-1-1-0 and is used for IP Multicast. See also RFC 1112. Class E is a class with first 4 MSB set to 1-1-1-1 and is used for IP broadcast.

According to IANA (Internet Assigned Numbers Authority), there are three specific IP address blocks reserved and able to be used for extending internal network. We call it Private IP address and list below:

Class A

10.0.0.0 ---

10.255.255.255

Class B

172.16.0.0

---

172.31.255.255

Class C

192.168.0.0 ---

192.168.255.255

Please refer to RFC 1597 and RFC 1466 for more information. Subnet mask:

It means the sub-division of a class-based network or a CIDR block. The subnet is used to determine how to split an IP address to the network prefix and the host address in bitwise basis. It is designed to utilize IP address more efficiently and ease to manage IP network.

For a class B network, 128.1.2.3, it may have a subnet mask 255.255.0.0 in default, in which the first two bytes is with all 1s. This means more than 60 thousands of nodes in flat IP address will be at the same network. It’s too large to manage practically. Now if we divide it into smaller network by extending network prefix from 16 bits to, say 24 bits, that’s using its third byte to subnet this class B network. Now it has a subnet mask 255.255.255.0, in which each bit of the first three bytes is 1. It’s now clear that the first two bytes is used to identify the class B network, the third byte is used to identify the subnet within this class B network and, of course, the last byte is the host number.

Not all IP address is available in the sub-netted network. Two special addresses are reserved. They are the addresses with all zero’s and all one’s host number. For example, an IP address 128.1.2.128, what IP address reserved will be looked like? All 0s mean the network itself, and all 1s mean IP broadcast.

128.1.2.128/25

Network

Subnet

10000000.00000001.00000010.1 0000000

25 bits

All 0s = 128.1.2.128

All 1s= 128.1.2.255

Publication date: March, 2007

Revision A1

10000000

11111111

18

Page 28
Image 28
Ruby Tech GS-1224L manual Network, Subnet, bits All 0s = All 1s=, User Manual, 10000000.00000001.00000010.1, 128.1.2.128/25