Ruby Tech GS-1224L manual Operation of Web-based Management, User Manual

User Manual

4.Operation of Web-based Management

This chapter instructs you how to configure and manage the 24-Port GbE Web Smart Switch through the web user interface it supports, to access and manage 20 10/100/1000Mbps TP Port and 4 Gigabit TP/SFP Fiber dual media port. The switch provides 20 fixed Gigabit Ethernet TP ports and four optional Gigabit dual media ports supporting either fiber or TP media. With this facility, you can easily access and monitor through any one port of the switch all the status of the switch, including MIBs status, each port activity, multicast traffic, and so on.

The default values of 24-Port GbE Web Smart Switch are listed in the table

below:

IP Address

Subnet Mask

Default Gateway

Password

192.168.1.1

255.255.255.0

192.168.1.254

admin

Table 4-1

After the 24-Port GbE Web Smart Switch has been finished configuration, you can browse it by using the IP address you set up. For instance, type http://192.168.1.1 in the address row in a browser, it will show the following screen (see Fig.4-1) and ask you inputting password in order to login and access authentication. The default password is “admin”. For the first time to use, please enter the default password, then click the <Apply> button. The login process now is completed.

In the switch, it supports a simple user management function allowing only one administrator to configure the system at the same time.

To optimize the display effect, we recommend you use Microsoft IE and have the resolution 1024x768.

Here is the whole function tree with web user interface and we will travel it through this chapter.

Publication date: March, 2007

Revision A1

47