RuggedCom RX5000 manual Rack Rear Mounting

3. Installation

3.1.1.3. Rack Rear Mounting

Assemble the rack mount brackets to the main chassis using six (6) #10-32 × 3/8" flat head steel screws (supplied) on each side. Screws are to be torqued to 18±1 in-lb. The brackets may be mounted either as shown above, or extended by 1".

Figure 3.9. Rack Rear Mount - Side View

Figure 3.8. Rack Rear Mount - Rear View

RuggedCom® RuggedBackbone™ 19 RX5000 Installation Guide Rev106