RuggedCom RX5000 manual Technical Specifications, Power Supply Specifications

4. Technical Specifications

4. Technical Specifications

4.1. Power Supply Specifications

Power Supply Type	Input Range		Internal Fuse Rating	Max. Power
	Min	Max		Consumptiona
HI (125/250 VDC)b	88 VDC	300 VDC	6.3A, 250V(T)c	84 Wd
HI (110/230 VAC)b	85 VAC	264 VAC	6.3A, 250V(T)c	84 Wd

aPower consumption varies based on configuration, i.e. the number and type of ports. Each 10/100Base-TX port consumes roughly 1W less than a fiber optic port.

bThe “HI” power supply is the same power supply for both AC and DC.

c(T) denotes time-delay fuse. Internal fuse is not user-replaceable.

dRating at 85°C ambient temperature at worst-case load.

Table 4.1. Power Supply Specifications

4.2. Critical Alarm Relay Specifications

Parameter	Value	(Resistive Load)
Max Switching Voltage	250	VAC, 125 VDC
Rated Switching Current	2A@250VAC, 2A@30VDC

Table 4.2. Critical Alarm Relay Specifications

4.3. Copper Ethernet Port Specifications

The RX5000 can be ordered with several different modules which contain 10/100Tx or 10/100/1000Tx Ethernet ports. All copper Ethernet ports have the following specifications:

Parameter	Specification	Notes
Speed	10/100 or 10/100/1000 Mbps	Auto-negotiating
Duplex	FDX / HDX	Auto-negotiating
Cable-Type	> Category 5	Shielded/Unshielded
Wiring Standard	TIA/EIA T568A/B	Auto-Crossover, Auto-Polarity
Max Distance	100 m
Connector	RJ45
Isolation	1.5kV	RMS 1-minute

Table 4.3. Copper Ethernet Port Specifications

RuggedCom® RuggedBackbone™ 29 RX5000 Installation Guide Rev106