![](/images/new-backgrounds/1202246/20224611x1.webp)
FCC Statement And Cautions
FCC Statement And Cautions
Federal Communications Commission Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference on his own expense.
CAUTION: LASER
This product contains a laser system and is classified as a CLASS 1 LASER PRODUCT. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
CAUTION: Service
This product contains no
Changes or modifications not expressly approved by RuggedCom Inc. could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the equipment.
Should this device require service, please refer to Chapter 7, Warranty in this guide.
CAUTION: Physical Access
This product should be installed in a restricted access location where access can only be gained by service personnel or users who have been instructed about the reasons for the restrictions applied to the location and about any precautions that shall be taken; and access is through the use of a tool or lock and key, or other means of security, and is controlled by the authority responsible for the location.
CAUTION: Hot Surface
Avoid contact with the surface of the unit. The metal surface may be hot due to the high allowable ambient temperature per specification.
ATTENTION: Surface Chaude
Éviter tout contact avec la surface. La surface métallique peut être chaude a cause d'une température ambiante élevée selon les spécifications. S.V.P. se référer à la version française de ce guide pour les détails.
RuggedCom® RuggedBackbone™ | 6 | RX5000 Installation Guide Rev106 |