Runco CX-40HD, CX-46HD manual RS-232 Controller, Connection, Connector Pin Assignments, Rear Panel

Installation

Use a standard RS-232 cable with a 9-pin male connector to connect a PC or home	RS-232 Controller
theater control/automation system (if present) to the RS-232 port on the Crystal Series	Connection
LCD Display; see Figure 3-11.
For more information about using this connection, refer to Serial Communications on
page 51.

To PC or

Automation/

Control

System

DB-9

Male

Connector Pin Assignments:

2	Receive Data
3	Transmit Data
5	Ground
1, 4, 6, 7, 8, 9	Not Connected

Rear Panel

Figure 3-11. RS-232 Control System Connection

Runco CX-40HD/CX-46HD Owner’s Operating Manual 23