Installation
14 Runco CX-40HD/CX-46HD Owner’s Operating Manual
PRELIMINARY
3.2 Quick Setup

Table 3-1 gives a quick overview of the Crystal Series LCD Display installation process.

The sections following this one provide detailed instructions.

Installation should be performed by a qualified custom video

installation specialist.

Table 3-1. Installation Overview

Step Procedure For Details, refer to
page...
1Mount the Crystal Series LCD Display on a wall (optional) 15
2Connect signal sources to the Crystal Series LCD Display 16
3Connect external controller to RS-232 port (optional) 23
4Apply power to the Crystal Series LCD Display 25
5Change the OSD language 25
6If using the Crystal Series LCD Display with a PC, adjust PC
display properties
26
7
Display calibration: adjust the following for each input;
save settings when finished:
• Brightness
• Contrast
• Color level
• Tint
• Input position
29 through 41
Note