Runco VX-22I Connections to, VX-22i, Connector Panel Access, Connecting Source, Components to

3.7	Proceed as follows to connect the VX-22i to your video sources, external controller(s) – if
Connections to the	present – and AC power.
VX-22i	When connecting your equipment:
	• Turn off all equipment before making any connections.
	• Use the correct signal cables for each source.
	• Ensure that the cables are securely connected. Tighten the thumbscrews on
		connectors that have them.
Connector Panel Access ➤	To access the connector panel, pull firmly on the cable access cover to open it.
Connecting Source ➤	Connect your video sources to the VX-22i as shown and described in the sections that
Components to the VX-22i	follow.
	HDMI Connections: See Figure 3-10.
			Tip		Use the HDMI inputs whenever possible. This ensures the highest
					video quality because the signal is carried in the digital domain
					throughout the entire signal path, from source component output
					into the projector.
				HD3 (VGA / Y-Pb-Pr)
				Pr)-Pb-Y / (VGA HD3

HD2 (BNC)

(BNC) HD2

HD1 (RCA)

(RCA) HD1

HDMI or DVI-to-HDMI Cable (sold separately)

BD/HD-DVD/

DVD/DTV STB

Figure 3-10. HDMI Source Connections

28 Runco VX-22i Installation/Operation Manual