Runco VX-33I operation manual VX-33i with Ceiling Mount Adapters/Projector Stands

Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, the adapters bring the attachment points for the projector mounting rails (included with the projector ceiling mount kit) from the bottom of the projector up and around the AutoScope lens motor housing. For floor installations (where the projector is upright), the adapters allow the projector to lie flat on the mounting surface.

Using six (6) each of the supplied, M6 x 12mm Pan-Head Phillips screws (item #2), attach the AutoScope Ceiling Mount Adapters/Projector Stands (items #3 and #4) to the projector as shown in Figure 3-7.

Figure 3-7. VX-33i with Ceiling Mount Adapters/Projector Stands

DO NOT OVER-TIGHTEN THE SCREWS.

Caution

24 Runco VX-33i Installation/Operation Manual