To access the motorized lens controls, use the FOCUS, ZOOM and LENS buttons on the VX-33i remote control unit (described on page 12).

Alternatively, select Display Device from the Service Menu. Select Configure, then Lens from the Display Device menu. The Lens menu gives you a great deal of control over the picture size, position and focus:

3.10 Primary Lens Adjustments

To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then,

Focus

press and hold the ENTER button on the remote control.

 

To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign

Zoom

(-). Then, press and hold the ENTER button on the remote control.

 

To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+).

 

Then, press and hold the ENTER button on the remote control.

 

To change the projected image position, use the cursor buttons to highlight “Left,”

Vertical and Horizontal

“Right,” “Up” or “Down” in the Lens menu. Then, press and hold the ENTER button to

Lens Shift

shift the image in that direction.

 

Runco VX-33i Installation/Operation Manual

37

Page 53
Image 53
Runco VX-33I operation manual Primary Lens Adjustments, Focus, Zoom, Lens Shift