Runco VX-33I operation manual

3. Remove the Lens Cavity Front Cover.

4. Remove the Rear Lens Cap.

5.Hold the lens assembly with the motor facing the upper-right corner of the Lens Cavity. Carefully insert the back of the lens assembly into the hole in the lens flange.

DO NOT PUSH THE LENS ASSEMBLY ALL THE WAY IN. Only push the lens assembly in far enough so that the front of the lens motor is clearly behind the projector chassis cover.

6.Carefully rotate the lens assembly 45

degrees clockwise until the motor socket connector is aligned with the connector on the flange. Then, gently push the lens assembly in until it is seated flush against the flange and the connectors have seated.

Runco VX-33i Installation/Operation Manual 21