Installation
Runco VX-4000d/VX-5000d Owner’s Operating Manual 21
PRELIMINARY
3.2 Quick Setup

Table 3-1 gives a quick overview of the VX-4000d/VX-5000d installation process. The

sections following this one provide detailed instructions.

Installation should be performed by a qualified custom video

installation specialist.

Table 3-1. Installation Overview

Step Procedure For Details, Refer to
page...
1Choose a location for the projector 22
2Install CineWide (secondary anamorphic) lens (optional) 27
3Connect the DHD Controller to the projector 28
4Connect signal sources to the DHD Controller 30
5Connect external controller to RS-232 port (optional) 34
6Connect other home theater components to 12-volt trigger
outputs (optional)
34
7Apply power to the projector 35, 37
8For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
37
9Lens adjustments: projected image size (zoom), position
(shift) and focus
25, 38
10
Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
41 through 48
Note