Keypad usage
Main Menu - Sleep Timer
You can set the timer so the zone turns off in one of the following increments: 15, 30, 45, or 60 minutes.
AM/FMSleep Timer 9:30 PM
After 15 minutes
After 30 minutes
After 45 minutes
After 60 minutes
Cancel
Main Menu - Set Party Mode or Do Not Disturb
Party and Master - The keypad that shows Master has started a "party" and keypads that show Party are "attending." All rooms are listening to the same music, and only the Master can change the music. Volume control remains independent.
Do Not Disturb - Someone in another room has chosen a source and locked out anyone else from changing it. That room also won’t be disturbed by paging or a doorbell chime.
AM/FM | Home | 7:30 PM |
| Alarm |
|
Shared | Sleep Timer |
|
DND | Party Mode |
|
| Do Not Disturb |
|
| Settings |
|
Main Menu - Settings
Audio - From the home screen, scroll to and select "settings," and choose "audio settings." You’ll see items to adjust, such as bass, treble and balance. Each selection has its own screen and shows levels for
Clock
Set Time - From the Clock menu, select "Set Time." Press the +/- buttons to move through numbers. Press the < or > buttons to move the cursor and press OK to save.
Set Date - From the Clock menu, select "Set Date." The date format is month/day/year. Press the +/- buttons to move through numbers. Press the < or > buttons to move the cursor, and press OK to save.
Clock Format - From the home menu, select "Settings," then "Clock." Choose "Clock Format," and select 12 hour (AM/PM) or 24 hour (1200) format.
Display - Set the contrast and brightness for the keypad display. Use the buttons to move the cursor to the desired level.
Installer Options
IR Enable/Disable - The default is Enabled. If an external IR receiver is used, the keypad IR receiver should be disabled. From the main menu, select "Settings," then "Installation," then IR Enable/Disable. Select "disable" and exit back to the menu.
Diagnostics - The
10 | Russound |
