Keypad IR Connections
External IR Connection to MDK-C5 Keypad
The
Use 2 twisted pair wire with one pair connecting GND (GROUND) and IR (SIGNAL) and the other pair connecting ST (STATUS) and V+ (+12VDC). Do not connect the shield to the IR receiver terminals.
If utilizing an external IR receiver, then you must disable the IR receiver in the keypad. This is disabled in the installer options menu on the keypad. See screen at right.
Russound 858
IR Receiver (back)
Do NOT
Connect
Shield
AM/FMFront IR 11:30 AM
Off
On
Disable Keypad IR
Shield wired to GND on keypad only
2 Twisted |
Pair Cable |
Connection of External IR to Keypad
Russound | 15 |