RULES FOR SAFE OPERATION
•To reduce risk of damage to charger body and cord, pull by the charger body, rather than cord, when disconnecting the charger.
•Make sure charger cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
•Do not operate charger with a damaged cord or plug. If damaged, replaced charger immediately.
•Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. If the charger case is damaged, replace the charger.
•Do not disassemble charger. The charger is not serviceable; disassembly may result in a risk of electric shock or fire.
•To reduce risk of electric shock, unplug the charger from outlet before attempting any maintenance or cleaning.
•Do not use charger outdoors.
•Use only the following type and size battery: Ryobi part #182391, 12 volt DC, sealed
•Do not dispose of batteries in a fire. The cell may explode. Batteries should be recycled, consult your local waste authority for information regarding available recycling and/or disposal options
•Do not charge battery in rain or in wet locations.
•Exercise care when handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
•Charge the battery in a location where the temperature is more than 50˚F (10˚C) but less than 100˚F (38˚C).
•Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
WHILE OPERATING
•To avoid accidental starting, never carry your unit with your finger on the trigger.
•Wear safety glasses or goggles that are marked as meeting ANSI
•Stay Alert. Watch what you are doing. Use common sense.
•Wear heavy, long pants, boots and gloves. Do not wear short pants, sandals or go barefoot.
•Dress Properly. Do not wear loose clothing or jewelry. They can be caught in moving parts. Secure hair above shoulder level.
•Adjust the
•Use the unit only in daylight or good artificial light.
•Use the right tool. Only use this tool for the purpose intended.
•Do not overreach. Always keep proper footing and balance.
•Do not force the unit. It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
•Always hold the unit with both hands when operating. Keep a firm grip on both the battery housing grip and
•Use only genuine Ryobi replacement parts when servicing this unit. These parts are available from your authorized service dealer.
•Do not use parts, accessories or attachments not authorized by Ryobi for this unit. Doing so could lead to serious injury to the user, or damage to the unit, and void your warranty.
•The trimmer is designed only for cutting grass, light weeds and decorative trimming. Do not use trimmer as an edger.
•Be sure the cutting attachment is not in contact with anything before starting the unit.
•If you strike or become entangled with a foreign object, stop the unit immediately and check for damage. Do not operate before repairing damage. Do not operate the unit with loose or damaged parts.
•Release the trigger, ensure the
•Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the cutting attachment when it is rotating.
•Always stop the motor when cutting is delayed or when walking from one cutting location to another.
•The cutting attachment shield must always be in place while operating the unit. Do not operate unit without trimming line extended, and the proper line installed. Do not extend the trimming line beyond the length of the shield.
•Keep unit clean of vegetation and other materials. They may become lodged between the cutting attachment and shield.
OTHER SAFETY WARNINGS
•Store the unit inside in a dry place, either locked up or up high to prevent unauthorized use or damage. Keep out of the reach of children.
•Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean and free from debris. Clean after each use, see Cleaning and Storage instructions.
•Be sure to secure the unit while transporting.
•Keep these instructions. Refer to them often and use them to instruct other users. If you loan someone this unit, also loan them these instructions.
SAVE THESE INSTRUCTIONS
4
