Saab 9-3 M03 installation instructions 383838, F920A018, Saab 9-3M03

Models: 9-3 M03

1 16

Page 11

12 788 928 11

38	38
38

38Remove the wiper arms using puller 85 80 144. Remove also the bonnet seal and the cover over the bulkhead space.

Saab 9-3 M03-

Image 11

Contents

Saab 9-3M03 Engine/cabin heaterMONTERINGSANVISNING · INSTALLATION INSTRUCTIONS Accessories Part No4Bolt M6x100 5Nut M8 6Nut M6 7Coolant hoses/pipes Heater mounting kit11 20 1Petrol heater 2Holder 3Exhaust systemSaab 9-3M03 Fuel line kit1Fuel line pump-heater 2Fuel line tank to pump F920A012Saab 9-3M03 Electrical connection kitWiring harness F920A013Smoking is absolutely forbidden Emptying the fuel tank 6 12Preparations Reduction of fuel pressure5Remove the exhaust system 1Disconnect the negative battery cable2Remove the cap from the expansion tank 3Raise the carTightening torque 24 Nm 18 lbf ft 14 15 37mm94mm Tightening torque 4 Nm 3 lbf ftTightening torque 24 Nm 18 lbf ft 26Fit the heater mounting bracket to the bulkheadF920A017 37 35 28Tightening torque 9 Nm 6.5 lbf ft Saab 9-3M03 383838F920A018 Unplug Pre Acc 12 124343 434345Raise the car 55Connect the wiring harness to the fuel pump Tightening torque 22 Nm 16.5 lbf ft Tightening torque 5 Nm 3.5 lbf ft65Connect the negative battery cable