![14 12 788 928](/images/new-backgrounds/49851/4985127x1.webp)
14 12 788 928
53
51
56 |
51Position the fuel pump bracket up against the vehicle floor, on the
52Deburr the holes and remove loose swarf and paint particles. Clean with Teroson Cleaner FL and apply Standox 1K primer. Apply a finishing coat.
53Fit the fuel pump with vibration damper and pro- tective cover onto the bracket.
Important
The smaller diameter connection should point towards the centre of the car and slightly forwards. The protective cover should be positioned under the pump.
54Connect the fuel lines to the fuel pump using a joint hose and two hose clips for each connec- tion. The joint hose which has a smaller diame- ter at one end should be arranged so that this end fits onto the smaller diameter connection of the pump. Attach the long fuel line to the pump bracket by threading a cable tie through the hole in the bracket.
55Connect the wiring harness to the fuel pump.
56Attach the harness to the bracket using a cable tie.
57Screw the bracket with the pump assembly onto the floor of the vehicle.
57
54
54 55
F920A021
Saab