Manuals / Sabrent / Computer Equipment / Computer Drive

Sabrent USBDSC5 manual Figure A

Models: USBDSC5

1 20

Download 20 pages 58.86 Kb

Page 14

Manual background

3.Connect the USB cable from the Sabrent converter to an available USB port on your computer.

Figure A:

Image 14

Sabrent USBDSC5 manual Figure A

Contents

Figure A Figure B Figure C Sabrent USB‐DSC5 USB 2.0 to SATA/IDE Hard Drive Adapter2.5” Notebook IDE Hard Drive Figure D Figure A Figure A2. Connect the USB cable from the USB‐DSC5 to an available USB port on your computer Figure B Figure C Figure D Figure E Figure F Figure G 3.5” Desktop IDE Hard Drive Figure A2. Connect the IDE power adapter directly in the IDE drive Figure A Figure B Figure CFigure A Figure B Figure DFigure A Figure C4. Connect the USB cable from the DSC5 to a USB port on your computer 2.5/3.5 Inch SATA Drive Figure A Figure BFigure C Figure D Figure E drive Figure A Figure B Figure CFigure D Figure E Figure F Figure A 2. Click on “Disk Management” Hard Drive SetupFor Windows 2000/XP/VISTA/7, no drivers or software are necessarry 4. At the following prompt, click “Next” 5. Click “Next”6. Assign a drive letter to the drive, then click “Next” Click “Next”9. Open “My Computer” and verify that the drive shows up properly If the drive has already been formatted, you can skip these steps Frequently Asked Questions4. Why doesn’t my 3 TB hard drive show up as full capacity?