Manuals / Sabrent / Computer Equipment / Computer Drive

Sabrent USBDSC5 manual Assign a drive letter to the drive, then click “Next”, Click “Next”

Models: USBDSC5

1 20

Page 17

6. Assign a drive letter to the drive, then click “Next”:

7.Click on “Format this volume with the following settings:” Change the “File system” to “NTFS”. Change the “Volume label” to what you want the drive to be named. Click the checkbox for “Perform a quick format”.

Click “Next”:

Page 17

Image 17

Sabrent USBDSC5 manual Assign a drive letter to the drive, then click “Next”, Click “Next”

Contents

Figure A Figure B Figure C Sabrent USB‐DSC5 USB 2.0 to SATA/IDE Hard Drive Adapter2.5” Notebook IDE Hard Drive Figure D Figure A Figure A2. Connect the USB cable from the USB‐DSC5 to an available USB port on your computer Figure B Figure C Figure D Figure E Figure F Figure A Figure G 3.5” Desktop IDE Hard DriveFigure A Figure B Figure C 2. Connect the IDE power adapter directly in the IDE driveFigure D Figure A Figure BFigure A Figure C4. Connect the USB cable from the DSC5 to a USB port on your computer Figure A Figure B 2.5/3.5 Inch SATA DriveFigure C Figure D Figure E Figure A Figure B Figure C driveFigure D Figure E Figure F Figure A 2. Click on “Disk Management” Hard Drive SetupFor Windows 2000/XP/VISTA/7, no drivers or software are necessarry 5. Click “Next” 4. At the following prompt, click “Next”Click “Next” 6. Assign a drive letter to the drive, then click “Next”9. Open “My Computer” and verify that the drive shows up properly If the drive has already been formatted, you can skip these steps Frequently Asked Questions4. Why doesn’t my 3 TB hard drive show up as full capacity?