Configuring WAP parameters

Select the Advanced… menu, then the configuration menu. Choose from the sub-menus offered:

Logon parameters is used to select or modify your access provider's logon parameters or configure the parameters of other access providers.

The active access service is preceded with a start.

Configuration of GSM and GPRS parameters (depending on model):

All information to be entered in the parameters are provided by your operator or access provider.

-Choose desired access service, then press Choice.

-Enter title of service and accept.

-Enter Internet address of home page and accept.

-Enter parameters of preferred logon:

GPRS otherwise GSM (by default): the logon to WAP services uses the GPRS as a priority. However, in the event of unavailability of the GPRS network, the GSM network is used to establish the link.

GPRS: the logon to WAP services uses the GPRS network exclusively.

GSM: the logon to WAP services uses the GSM network exclusively.

The GSM parameters to be entered are:

-User name

-Password

-IP address of WAP gateway

-Port type (secure or insecure)

-Call number

-Access mode (digital, analogue or automatic)

In automatic mode access can be gained to the operator's network by a digital link and by an analogue link to a different network (in roaming).

The GPRS parameters to be entered are:

-User name

-Password

-IP address of WAP gateway

-Port type (secure or insecure)

- APN: if no APN has been defined, press the right programmable key

[Choice] then the APN menu.

Select or add and APN.

 

WAP

33

Page 33
Image 33
Sagem MyX2-2m manual Configuring WAP parameters, Configuration of GSM and Gprs parameters depending on model