Preparing for Use
WARNING: Do not attempt to assemble parts inside the Rotisserie while it is plugged in or hot. Burns or other serious injuries can occur.
Before Using Rotisserie for the First Time
Before using your George Jr.™ Rotisserie for the first time, wash all accesso- ry parts with hot, soapy water. Rinse all parts well and dry thoroughly. Be sure the Rotisserie is unplugged and use a damp cloth or sponge to wipe down the inside and outside of the Rotisserie.
CAUTION: Never immerse the Rotisserie in water or any other liquid!
Prepare Food
We recommend preparing the food to be cooked before proceed- ing with any Rotisserie assembly. Cut all vegetables to be cooked or prepare a homemade marinade for extra flavor (see “Recipes” for information about Marinades and Rubs). If necessary, store food in refrigerator while preparing Rotisserie.
Rotisserie Bar Assembly
Before placing any items to be cooked onto the Rotisserie Bar Assembly, we suggest familiarizing yourself with how the Rotisserie operates, how it fits into the Rotisserie, and how each accessory works with the Rotisserie Bar Assembly.
1.Locate the Rotisserie Bar Assembly.
2.Note the two End Wheels; one has a small gear and center stud attached to it, the other End Wheel only has a center stud.
3.Carefully grasp the End Wheel with the small gear and pull off the opposite wheel. When the End Wheel is removed, you will notice two meat tines with pointed ends. This is how you put the food or accessories onto the Rotisserie Bar Assembly.
4.Once food is secure on meat tines, firmly push the end wheel over the pointed meat tines to complete the assembly.
11
