Preparing for Use (Cont.)
5.WITHOUT TURNING THE ROTISSERIE ON YET, use the Cover Handles to lift open the Cover.
6.Hold the Rotisserie Bar Assembly so
the End Wheel with the small gear faces to the right. Slide the Rotisserie Bar into the Rotisserie along the Rotisserie Bar Assembly Track. See Figure 1. Allow each end of the Rotisserie Bar Assembly to drop into the center grooves in the Rotisserie Bar Track. Be sure the Rotisserie Bar Assembly is seated properly in Track Grooves.
Assemble Drip Tray
1.If not in place, slide Drip Tray into position as shown in Figure 2.
Insert Reflector
1. Grasp the Handle and slide the Reflector behind the elements. See Figure 3. Make sure the metal hooks catch on the element brackets. The bottom of the Reflector will angle over the Drip Tray.
Placing Accessories onto
Rotisserie Bar Assembly
1. Determine which accessory you will use with the Rotisserie Bar Assembly (Adjustable Flat Basket, Air Bake Round Basket, or Skewers).
2.If the Rotisserie was previously used, be sure all parts have cooled. Remove Rotisserie Bar Assembly from inside Rotisserie.
3.Follow steps
4.Locate the instructions on the following pages for the accessory you wish to use. Follow the appropriate steps for placing the accessory onto the Rotisserie Bar Assembly.
5.Once accessory is secure on Rotisserie Bar Assembly, position the Removable End Wheel over the pointed meat tines and firmly push the assembly together.
6.Follow steps
12