Samson Graphite 25 owner manual Section of the keyboard Zn Port Transmitting port Zn Ch

Graphite 25 · USB/MIDI Keyboard Controller

Zones Mode

Available parameters in Zone Mode:

Parameter	Description	Range
Zn: Prog [1]	Program number for playing on the specific section of the	0–127
	keyboard [2]
Zn: MSB	Most Significant Bit of the program bank for playing on the	0–127
	specific section of the keyboard
Zn: LSB	Least Significant Bit of program bank for playing on the specific	0–127
	section of the keyboard
Zn: Port	Transmitting port	1–5
Zn: Ch	Transmitting channel - the channel always follows the channel	1–16
	of Zone 1 if set to “-“
Zn: Rang<	Note number of the most left key in the specific section of the	0–127
	keyboard [3]
Zn: Rang>	Note number of the most right key in the specific section of the	0–127
	keyboard. [3]
Zn: Oct	Octave shift for the specific section of the keyboard. [4]	-4–0–4
Zn: Trans	Transpose for the specific section of the keyboard. [5]	-12–0– 12

[1]“n” represents zone number

[2]If you set different programs in different zones with the same port and channel, it will cause a conflict, and the unit will use the program of the last activated zone.

[3]Press a key on the keyboard to set the beginning and end key of the range. If the end key is lower than beginning key, the entry will be rejected.

[4]Use the OCTAVE +/- buttons to change the octave shift.

[5]Use the TRANSPOSE +/- buttons to change the transpose.

21