Front Panel Controls and Functions
13.Trigger Pads - The four
14.PAD A/B Button - The Trigger Pads are configured into two pad banks, with different set- tings configured to each pad. Press the PAD A/B button to toggle between the two banks.
15.Transport Buttons - The five transport buttons control universal Rewind, Fast Forward, Stop, Play and Record functions (respectively) in the factory default setting. They can also be as- signed to control different parameters in the Setup Mode, similar to the Function Buttons. If you encounter a stuck (hanging) note, press the Rewind and Fast Forward buttons together to send a Panic command to all ports and channels. The Panic command includes “all notes off,”“reset all controllers,”“reset pitch bend” and “reset GM” system messages.
16.OCTAVE +/– Buttons - Press the OCTAVE buttons to shift the octave of the keyboard up or down a maximum of four octaves, to extend the range of the keyboard. Each time you press the OCTAVE button, the range of the keyboard shifts up or down 12 notes.
17.TRANSPOSE +/– Buttons - Press the TRANSPOSE buttons to shift the range of the keyboard up or down a maximum of 12 semitones
18.PITCH BEND Wheel - Use this wheel to raise or lower the pitch of notes played on the keyboard.
19.MODULATION Wheel - This wheel is usually used to add vibrato or other expressive effects to a sound being played.
20.Master Volume Slider - This slider sends continuous control data via the USB or MIDI OUT jacks. The Master Volume slider is preset from the factory to control the master volume con- trol. The slider can be assigned to control different parameters in Setup Mode.
21.Function Keys - In Setup Mode, the first 18 keys of the keyboard are assigned to functions, and numerical digits
10
