Graphite 25 · USB/MIDI Keyboard Controller
Performance Controls
Transport Buttons
There are five transport buttons marked 
. The factory default settings are to Rewind, Fast Forward, Stop, Play, and Record, respectively. Please see detailed information for the default settings in the table below.
Component | Category | Description | Port | Message | Transmitted Data (H) | Type | Mode | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Rewind | - | CC: 116, Ch - | B0 74 7F/00 | Ctrl | Toggle |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Fast Forward | - | CC: 117, Ch - | B0 75 7F/00 | Ctrl | Toggle |
|
|
| Transport |
|
|
|
|
|
|
|
|
| Stop | - | CC: 118, Ch - | B0 76 7F/00 | Ctrl | Toggle | |
|
|
| |||||||
|
|
| Button | ||||||
|
|
|
|
|
|
|
|
| |
|
|
|
| Play | - | CC: 119, Ch - | B0 77 7F/00 | Ctrl | Toggle |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Record | - | CC: 114, Ch - | B0 72 7F/00 | Ctrl | Toggle |
|
|
|
|
|
|
|
|
|
|
The function of each button is assignable. You can change parameters or assign other controls to these buttons through the setup function. Please refer to “Setup Mode” on page 17 for details.
During performance, if a note is stuck on, press the 
(Rewind) and 
(Fast Forward) buttons si- multaneously, and the unit will send Panic command to all ports and channels of external sound, causing the device to terminate the sound. The Panic command includes “all notes off,”“reset all controllers,”“reset pitch bend” and “reset GM” system messages. During the panic processing, “PANIC” will appear in the Operation area of the display.
Note: Not all sound generating devices support this Panic command.
25
