Samsung 164BX Upgrading the Arcsbios Firmware, Installing Windows NT, Add-in Board Utilities

Upgrading the ARCSBIOS Firmware.

7.2.6 Print Configuration

This option will dump the information in the configuration tree to the parallel port so that it may be printed.

7.2.7 Add-in Board Utilities

This option allows you to run configuration utilities for add-in cards that have been ported to the AlphaPC 164UX motherboard. At the time of printing there are no util- ities available.

7.3 Upgrading the ARCSBIOS Firmware.

To upgrade the ARCSBIOS firmware, you will need to have an ARCSBIOS Firm- ware Upgrade floppy. To upgrade the firmware follow the following steps.

1.Insert the Firmware Upgrade for AlphaPC 164UX diskette into the floppy drive.

2.Get the motherboard to the bios level.

3.From the main ARCSBIOS screen select Enter Setup.

4.From the Setup Menu, select Advanced Setup.

5.From the Advanced Setup Menu, select Upgrade Firmware.

6.Press ENTER to begin the upgrade.

7.4Installing Windows NT

This section supplements the Microsoft Windows NT installation guide for installing Windows NT on a AlphaPC 164UX system.

7.4.1 Requirements

You need the following hardware and software to install the Windows NT operating system on a AlphaPC 164UX system:

•A 100MB or larger hard drive

•32 MB or more of memory

•The Microsoft Windows NT compact disk

•The Install Floppy for Windows NT 4.0 for AlphaPC 164UX diskette

Note: The Install Floppy for Windows NT 4.0 for AlphaPC 164UX diskette is required for Windows NT 4.0 operating system. Future versions may not require diskette. Contact your OEM or system vendor for details.

7–6Configuring for Windows NT