Samsung 164BX Installing Windows NT, Windows NT Setup, If you want to accept, press Enter

Installing Windows NT

1.Insert the Windows NT4.0 install Floppy for the AlphaPC 164UX diskette into drive A:

2.From the main ARCSBIOS screen select Enter Setup. 3.select Run a Program from the setup menu and press Enter. 4.Type in: A:\miniport.exe and press Enter.

5.Maintain Flash Device will start.In the Menu shown select Add SCSI Miniport to Flash and press Enter

6.Remove the Windows NT4.0 install Floppy for the AlphaPC 164UX diskette from drive A:

7.Insert the disk labeled manufacturer supplied hardware support disk into drive A: 8.Type SCSI Driver File Name for SCSI card.

ex)Type A:\xxxx.sys and press Enter

9.The next screen displayed will say what woule you like to call the Flash file?--> press ENTER to accept : [xxxx.sys]

If you want to accept, press Enter

Please enter a description of the FLASH file-->

Type description and press Enter ex) Adaptec

10.In Maintain Flash Device Menu select save changes to Flash and Exit and Enter

11.If upgrade Firmware completed,press Enter 12.Restart your computer

13.From the main ARCSBIOS sereen select Enter Setup

14.In Advanced setup->Set NVRAM options->SCSI miniport order press Enter 15.In SCSI Miniport Detection Order Menu select Adaptec(description) 16.Change Disable to 0 with <-- key and --> key.

17.press ESC Twice

18.In Save Configuration Menu displayed will say Save changes to Non-Volatile RAM(Y/N)

19.Press Y and Enter.

20.if you restart your computer,your SCSI Device will be detected.

21.If you want to delete SCSI Device file,In Maintain Flash device Menu select

Delete SCSI Miniport from Flash

7.4.3 Windows NT Setup

Windows NT setup, located on the Microsoft Windows NT CD, installs the Windows NT operating system. Windows NT setup provides a brief description of the avail- able key functions at the bottom of the screen.

7–8Configuring for Windows NT