Connecting the Speakers
Connect the supplied speaker system using the supplied speaker cords.
- Make all connections with the power turned off to the unit to protect the speakers.
Check the location of the terminals on the main unit and on the rear of the
1 speakers before connecting the Front, Rear, and Center Speakers.
-Connect the red cord to the red(+)terminal and the black cord to the
-Make sure the positive (+) and negative
2 Use the supplied audio cord to connect the SUBWOOFER PREOUT on the rear of the main unit to the LINE IN on the rear of the speaker.
• After installation is complete, tie up or taping down long, loose electrical cords.
1 Loosen the speaker terminal by turning it counterclockwise. 1
2 Insert the speaker wire into the terminal.
3 Tighten the speaker terminal by turning it clockwise.
Right rear speaker Left rear speaker | Center speaker |
(— ) | (+) |
(— ) | (+) | (— ) | (+) |
2 |
| 3 |
|
|
|
Subwoofer
LINE IN
R L/LFE
CONNECTIONS
Ideal Speaker Placement
Center speaker
Left front speaker |
| Right front |
|
| speaker |
|
| |
|
|
|
Subwoofer
Left rear | Right rear |
speaker | speaker |
Front Speakers
Set the front speakers so that their tweeters
Center Speaker
Ideally the center speaker should be positioned with its top surface flush with the front speakers. However, you may place the speaker either on top or near the bottom of your TV set. Vibration caused by the center speaker can disrupt the picture if it is placed directly on the television. Put the center speaker on a rack or shelf.
(— ) | (+) | (— ) |
Audio Cable (supplied)
(+)
Rear Speakers
Right front speaker Left front speaker
Set the rear speakers further back, parallel to the walls, at 60 to 90 centimeters (2 to 3 feet) above prime listening position ear level.
If the space behind the listening position is insufficient (i.e., too close to the wall), place the rear speakers facing each other on either side.
Subwoofer Speaker
Place the subwoofer on the floor near the TV or mount it on a rack, free from vibration and instability.
•Please refer to the KLIPSCH Operation Manual for details on using the speakers.
1 Press and hold the terminal tab.
2 Insert the speaker cord.
3 Release your finger.
1
2
Red
Black
3
9 | 10 |