Controlling a TV with the Remote
You can operate your TV by adjusting the DVD remote signal .
P.SCAN(Progressive Scan) Function
Unlike a regular Interlace Scan in which two fields of picture information are alternated to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines. To enjoy a progressive scan video, connect a TV or monitor that supports a progressive scan input to this device.
1 | Turn on the TV. |
|
2 | Point the DVD’s remote at the TV. | |
3 | TV |
|
While holding the | button down, enter the | |
code for your brand. |
|
•If there is more than one code listed in the table, enter one at a time to determine which code works.
example : For SAMSUNG 1TVs | TV | |
While holding down the | button, | |
enter | . |
|
Code | Brand | Code | Brand |
01 | SAMSUNG 1 | 16 | SHARP 1 |
02 | SHARP 2 | 17 | ZENITH |
03 | SONY | 18 | LG 3 |
04 | MAGNAVOX | 19 | DAEWOO 8 |
05 | SANYO 1 | 20 | SANYO 2 |
06 | LG 2 | 21 | EMERSON |
07 | RCA | 22 | SHARP 3 |
08 | LG 1 | 23 | SAMSUNG 4 |
09 | TOSHIBA | 24 | MATSUSHITA |
10 | HITACHI | 25 | NOBLEX |
11 | JVC | 26 | TELEFUNKEN |
12 | PANASONIC 1 | 27 | NEWSAN |
13 | MITSUBISHI 2 | 28 | LOEWE |
14 | SAMSUNG 2 | 29 | RCA2 |
15 |
|
|
|
|
|
|
|
While the player is in the Stop mode, hold the P.SCAN button down for longer than 1 second.
• The selection switches back and forth between "P.SCAN" and "I.SCAN" | CONNECTIONS |
| |
each time the button is held down for a minimum of 1 second. |
|
• The previous mode is indicated in the display first, followed by the |
|
selected mode in about a second. |
|
P.Scan Adj (Progressive Scan Adjusting) |
|
This function allows you to optimize the picture quality when it becomes poor due to screen distortion or discs containing erroneous data.
Press the Setup/P .Adj button. (Play mode only)
4 | If the TV turns off, setup is complete. | • The remote may not be able to |
|
control every model TV of the brands listed.
Connecting your System to the Power Supply
The AC Cord must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
1.Plug the AC Cord on the rear of the system into an appropriate outlet.
2.Press the On/Standby button to switch your DVD Player system on.
15
•Each time the Setup/P .Adj button is pressed, the following appears on the TV screen:
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS) | Progressive Scan (FULL FRAME) |
In | The progressive scanning method scans one full frame of |
interlaced fields (odd and even), where each field | video consecutively down the screen, line by line. |
contains every other horizontal line in the frame. | As opposed to the interlaced scanning process by which a |
The odd field of alternating lines is displayed first, and | video image is drawn in a series of passes, you get an |
then the even field is displayed to fill in the alternating | entire image drawn at one time. |
gaps left by the odd field to form a single frame. | The progressive scanning method is desirable for dealing |
One frame, displayed every 1/30th of a second, contains | with moving objects. A camera that has the ability to |
two interfaced fields, thus a total of 60 fields are | capture moving objects is called a "full frame shutter |
displayed every 1/60th of a second each. | camera". |
The interlaced scanning method is intended for capturing |
|
a still object. |
|
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that |
|
support Progressive Video. (It does not work on TVs with conventional component inputs, | 16 |
i.e., |
• Depending on the brand and model of your TV, this function may not work.