33
ENG
Selecting the Picture Size
You can select the picture size which best corresponds to your
viewing requirements.
1Press the MENU button.
Result:The main menu is displayed.
2Press the †or …button to select Picture.
Result:
The options available in the
Picture
group are
displayed.
3Press the ENTER () button.
4Press the †or …button until the Size is selected. Press the
ENTER () button
5Press the †or …button to change the setting.
◆Auto Wide :Expanding and pulling up the picture from 4:3 to
16:9 ratio.
◆16:9 :Sets the picture to 16:9 wide mode.
◆Panorama :Use this mode for the wide aspect ratio of a
panoramic picture.
◆Zoom :Magnify the size of the picture vertically on
screen.
◆14:9 :Magnify the size of the picture more than 4:3.
◆4:3 :Sets the picture to 4:3 normal mode.
6Press the ENTER () button to confirm.
➣◆You can select these options by simply pressing the
P.SIZE button on the remote control.
◆The picture size can not be changed in the PIP mode.
◆Depending on the input source, the P.SIZE options
may vary.
Positioning and Sizing the screen using Zoom
➣◆Resizing the screen using the Zoom enables the
positioning and sizing of the screen to up/down
direction using the
†
or
…
button as well as the
screen size.
◆Move the screen up/down using the
†
or
…
button
after selecting the by pressing the
†
or
…
button.
◆Resize the screen vertically using the
†
or
…
button
after selecting the by pressing the
†
or
…
button.
◆Screen enlargement operates only in TV/Video/
S-Video/Component1,2 input modes.
◆PC/DVI modes prevents the screen enlargement
function.
Size
Move Enter Return
TV
Mode : Dynamic √√
Custom √√
Colour Tone :Normal √√
Colour Control √√
Film Mode : Off √√
Size : 16 : 9 √√
DNIe : On √√
PIP √√
Auto Wide
16:9
Panorama
Zoom
14:9
4:3
Picture
Move Enter Return
TV
PC to DVI Mode
Size
Move Enter Return
TV
Auto Wide
16:9
Panorama
Zoom
14:9
4:3
BN68-00597A-01 4/2/04 6:38 PM Page 33