Samsung 4240 manual Switching On and Off, Mains lead is attached to the rear of your PDP

BN68-00597A-01 4/2/04 6:38 PM Page 13

Switching On and Off

ENG

The mains lead is attached to the rear of your PDP.

1	Plug the mains lead into an appropriate socket.			Front of the PDP
	Result:	The Standby indicator on the front of the PDP lights up.
	➢ The main voltage is indicated on the rear of the PDP and
	the frequency is 50 or 60Hz.
2	Press the “I / ” button on the front of the PDP (or POWER (		)
	button on the remote control) to switch the PDP on.

Result: The programme that you were watching last is re- selected automatically.

➣If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 18 or “Storing Channels Manually” on page 19.

3 To switch your PDP off, press the “I / ” button again.

TV

Placing in Standby Mode

Your PDP can be placed in Standby mode, in order to reduce the

Power consumption.

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER ( ) button on the remote control.

TV

Result: The screen is turned off and the Standby indicator on the front of the PDP lights.

2To switch the PDP back on, simply press the POWER ( ) button

again or a numeric button.

➣ You can also switch on by pressing the P or button.

13