Panasonic DMR-ES20DEB manual Setting the remote control, Child lock, Operating a television set

Remote control

7m

30°

30°

Remote control signal sensor

Point the remote control at the unit’s sensor. Avoid obstacles in the path of the transmission. The maximum range of the remote control is 7 m directly in front of the unit. Keep the transmission window and the unit sensor clean. The procedure can be impaired by direct sunlight or doors of glass cabinets.

Child lock

You can lock the buttons of the unit and the remote control.

!	Press and hold RETURN and ENTER until	X HOLD	appears in the display.
	The unit is now locked.
!	In order to unlock the child lock, repeat the procedure until			X HOLD	disappears.

Operating a television set

Change the remote control code to operate your television set.

!Press and hold the TV on and off switch button.

!Enter the two-digit code for your television set.

The input must be repeated after batteries are changed.

		F
		U
		N
		C
		T
		I
S	N	O

SETUP	Remote Control	DVD 1
	Clock
	Owner ID
Tuning	Quick Start	On
Disc	System Update
Picture	Shipping Condition
Sound	Default Settings

Display	Remote Control
Connection
Others	DVD 1
	DVD 2
	DVD 3
	SELECT
	ENTER
	RETURN

Trademark	Code	Trademark		Code	Trademark	Code	Trademark	Code
Panasonic	01-04,45	GOLDSTAR/LG		31	MIVAR	24	SALORA	26
AIWA	35	GOODMANS	05,06,31		NEC	36	SAMSUNG	31,32,43
AKAI	27,30	GRUNDIG		09	NOKIA	25-27	SANSUI	05,31,33
BLAUPUNKT	09	HITACHI 22,23,31,40-42			NORDMENDE	10	SANYO	21
BRANDT	10,15	INNO HIT		34	ORION	37	SBR	06
BUSH	05,06	IRRADIO		30	PHILIPS	05,06	SCHNEIDER 05,06,29-31
							SELECO	06,25
CURTIS	31	ITT		25	PHONOLA	31,33
							SHARP	18
DESMET	05,31,33	JVC		17,39	PIONEER	38	SIEMENS	09
DUAL	05,06	LOEWE		07	PYE	05,06	SINUDYNE	05,06,33
ELEMIS	31	METZ		28,31	RADIOLA	05,06	SONY	08
							TELEFUNKEN	10-14
FERGUSON	10	MITSUBISHI	06,19,20		SABA	10
							THOMSON	10,15,44

Some television models of the brands listed above, (e.g. older Panasonic units), cannot be operated using the remote control.

Switching to AV input on your Panasonic television set

!Press AV. Each press of the button switches between TV reception and AV input.

If you use another Panasonic device at the same location, change the mode of the remote control so that you can operate the units independently of each other.

Setting the remote control

Setting the remote control mode for unit.

!Press FUNCTIONS in stop mode.

!Use to select [To Others] and confirm with ENTER.

!Use to select SETUP and confirm with ENTER.

!Use to select [Others], to select [Remote Control] and confirm with ENTER.

!Use to select the desired mode [DVD 1, 2 or 3] and confirm with ENTER.

Accept the desired mode on the remote control.

!Press and hold the ENTER button for approx. 2 seconds and, at the same time, enter the number that corresponds to the selected mode (1, 2 or 3).

!Press RETURN to exit the menu.

If the mode of the remote control does not correspond with that of the unit, [REMOTE DVD 1 / 2 / 3] will appear on the unit display.

!Press and hold the ENTER button for approx. 2 seconds and, at the same time, enter the number that corresponds to the selected mode (1, 2 or 3).

If you want to operate two units independently of each other with the same remote control, then change the mode of the remote control.

The input must be repeated after batteries are changed.

7