Panasonic DMR-ES20DEB manual Removing Interference / Changing RF output channel

Removing Interference / Changing RF output channel

TV screen

The picture with interference

RF OUTPUT CHANNEL

DVD

CH: 21

SELECT

ENTER

RETURN

On-Screen Display

Test pattern indication

DVD display

Indication when the RF output

channel is 21 (example)

In some cases, interference (lines or patterning) or a very poor picture may appear on the TV when the DVD Recorder is connected. If this happens, follow the steps below to change the RF output channel to remove the interference.

		F
		U		Press the FUNCTIONS button for more than 5 seconds. The RF output channel
		N	!
		TC
		I		number is displayed on the DVD display.
S	N	O
PAGE			! Press the Numeric buttons or use the Channel (CH) button to select		1	2	3
CH				a channel number, which differs at least by 2 or 3 from the present	4	5	6
				channel number. (For example, if the original channel number was	7	8	9
				28, enter 31.)		0

!Retune your TV until you receive the Test pattern. It may be necessary to repeat steps above until you can see the Test pattern clearly.

If using a Scart cable please see the note below.

Indication after changing the RF output channel to 31 (example)

RF OUTPUT CHANNEL

DVD

CH: 31

SELECT

ENTER

RETURN

Test pattern indication

!Press ENTER to finish this setting.

Set the RF output channel of the DVD Recorder to [- -] (RF OFF) if the DVD Recorder is connected to the TV via the 21-pin Scart cable.

!Press FUNCTIONS for about 5 seconds. The preset channel will be displayed on the DVD display.

!Press channel select buttons CH or 0 to invoke [- -].

!Confirm with ENTER.

21 ... 68 (RF OFF)

The clear picture

Checking the Settings after Auto-Setup

F

U

		N
		C
		IT
FUNCTIONS	N	O
	S
DVD-RAM
Disc Protection Off
DIRECT NAVIGATOR	PLAYLISTS
	FLEXIBLE REC
TV Guide	SETUP
TIMER RECORDING	DISC MANAGEMENT
VIDEO Plus+
To Others	Return
ENTER
RETURN

SETUP	Edit Profiles
	Auto-Setup Restart						RETURN
Tuning	Digital
	Add New DVB Service
Disc
Picture	Signal Quality
Sound	Analogue
Display	Manual			Manual Tuning
Connection			Name			Name	Ch
Others		Pos		Ch	Pos
		901	BBC1	22	911
		902	BBC2	23	912
		903	ITV	24	913
		904	CH4	25	914
		905	CH5	26	915
		906	* * * *	30	916
	SELECT	907			917
	ENTER	908			918
		909			919
	RETURN	910			920
	Delete

TV Reception Channels

!Press FUNCTIONS to display the FUNCTIONS Menu.

!Press to select [To Others] and then press ENTER.

!Press to select SETUP and then press ENTER.

!Press to select [Manual] and then press ENTER to display the list of tuned TV stations and confirm that all available TV stations have been set correctly.

If station name is []:

The asterisks indicate that a station was found during Auto-Setup but has not been

named (due to weak signal).	44
The stations in the list with asterisk will need to be named manually.
If station name is [- - - -]:
The dashes represent unused channel positions.	44
You can set stations manually if you want to.

!Press RETURN to exit the On Screen Display.

When the station names have not been set correctly, see page 44 for details. When no station has been found, confirm all connections of the DVD Recorder again and restart the Auto-Setup. See page 43 for details.

!Check and sort your digital channel in the Setup menu under [Edit Profiles]. See page 42 for details.

15