Panasonic DMR-ES20DEB manual Others Setting, Others Clock, Clock setting, Others Onwer ID

FUNCTIONS Selection Menu

	F	To Others
	U
	N
	C
N	IT
	O
S
	SETUP	Remote Control	DVD 1
		Clock
		Owner ID
Tuning		Quick Start	On

SETUP

Others	Setting	ENTER	Option	ENTER
Remote Control		[DVD 1] [DVD 2] [DVD 3]

Change the code of the remote control so that you can also use another Panasonic DVD unit at the

Disc	System Update
Picture	Shipping Condition
Sound	Default Settings
Display

same time.

Clock

7

Connection	SELECT
Others	TAB
	RETURN

Set the date and time.	47
Owner ID
Secure the unit with your own PIN number and your own personal information.	47

Quick Start

[On] [Off]

On: The device is ready for use from standby mode after approx. 2 seconds. Standby mode uses more power.

Off: If you select Quick Start [Off], the programme information for TV Guide need to be reloaded after Power ON. 18

System Update	[EPG Download in Standby], [Software Update in
	DVB only
	Standby], [Software Update Search Now]
Load new software to your unit or update the programme guide during the night.		48

Shipping Condition

All settings except for the security levels with associated password and the time settings are reset to their factory settings.

Default Settings

All settings except for the programmed channels, time, country, language and disc-language settings, the security levels including password and the remote-control code are reset to the factory settings.

Clock

		Automatic		Off
Time		Date
0 : 00 : 00		1 . 1 .	2005
	Please set the clock.
CHANGE		RETURN: leave
	ENTER: access

ENTER

RETURN

If Clock setting is set to AUTO, do not set it to MANUAL, otherwise the automatic time correction function is deactivated.

This DVD Recorder uses a 24 hour clock. In case of a power failure an automatic back-up system maintains the clock for approximate 60 minutes.

When Clock setting is set to AUTO, the automatic time correction function checks and if necessary adjusts the time several times every day.

The automatic time correction function only works when the DVD Recorder is in standby, it does not work in the timer recording mode.Don't forget to change summer time and winter time.

Owner ID

PIN number * * * *

Name	* * * * * * * * * * * * * *
House No. * * * * * * * * * * *
Postcode	* * * * * * * * * * *

RETURN

RETURN : leave

Others Clock ENTER Option ENTER

Clock setting

The clock will normally be set correctly during Auto-Setup however, in some circumstances the DVD Recorder cannot set the clock automatically. In this case follow the operation steps below to manually set the clock.

!Use to switch automatic mode to [Off] and confirm with ENTER.

!Use and to change Time and Date.

!Confirm the change with ENTER.

To activate the automatic time correction function

The correct time for the clock can be automatically maintained when the DVD Recorder is tuned to a station that transmits a time signal.

!Use to switch automatic mode to [On] and confirm with ENTER. The automatic setting of the clock begins.

!Under adverse reception conditions, etc., the Automatic time correction function may not work. In this case the indication for Clock setting is automatically reset to MANUAL.

If the reception conditions improve later on, it is possible to activate this function.

Others Onwer ID ENTER Option ENTER

Owner ID

! Use and press the Numeric buttons or to enter a four-digit PIN number.

!Press to correct the digit.

!Press the ENTER button twice to confirm.

!Enter the [Name], [House No] and [Postcode] in the same way, using .

!Press the ENTER button to confirm each entry.

!Press the RETURN button to leave the Owner ID screen.

To display the Owner ID information on TV

!On the unit press STOP for more than 5 seconds.

The PIN number is not displayed.

After 30 seconds this menu automatically disappears.

47