Panasonic DMR-ES20DEB manual Recording from an external device, e.g. a camera

TIMER-controlled recordings

SETUP	AV2 Settings
	AV2 Input	Video
	Ext Link	Ext Link 1
Tuning
Disc
Picture
Sound		Ext Link
Display		Ext Link 1
Connection		Ext Link 2
Others
	SELECT
	ENTER	RETURN

Before TIMER recordings via external devices

You control the recording function via an external device (e.g. receiver) using EXT LINK. Connect the external device with a 21-pin Scart cable to the AV2 socket.

Adjust the Ext Link function for the connected device.

!Press FUNCTIONS, use to select [To Others] and press ENTER.

!Use to select SETUP and press ENTER.

!Use to select Connection, , to select AV2 Settings and press ENTER.

!Use to select Ext Link and confirm with ENTER.

!Use to select [Ext Link 1] or [Ext Link 2] and confirm with ENTER.

Ext Link 1:

For digital receivers that send a special recording control signal, e.g. the SKY SATELLITE RECEIVER.

Ext Link 2:

External recording control for satellites or digital receivers (video signal).

If the television is connected to the AV1 connection via the 21-pin Scart cable, the picture to be recorded appears on the screen.

The beginning of the recording may not be recorded correctly in certain cases.

The Ext Link 2 setting cannot be used if the input signal is in NTSC format.

TIMER recordings via external devices (EXT LINK)

The programming of the recording must take place on the external device.

The recording begins when a corresponding signal is received from the connected device and ends when the transmission of the signal is stopped.

!Press EXT LINK.

Standby mode for TIMER-controlled recordings is activated. EXT Link lights up on the display.

If you have activated the External Link Standby mode, remote control functions such as the TV Guide are not available.

Switching off control via the external device

!Press EXT LINK to end the recording or to switch off the standby mode for the TIMER-controlled recording. The EXT Link display turns off.

Recording from an external device, e.g. a camera

RAM-R-RW(V) +R Connect the external device to the AV3 input sockets on the front side of the unit.

RAM If you activated the write-protection, deactivate it.

Choose one of the two connection possibilities.

Connection with S VIDEO cable and audio cable (L/R) produces the best quality.

S VIDEO IN VIDEO IN L/MONO - AUDIO IN - R

AV3

A B

Audio/

Video cable

A White (L)

S VIDEO cable

B Red (R)

S VIDEO IN VIDEO IN L/MONO - AUDIO IN - R

AV3

A B C Audio/

Video cable

A Yellow (Video)

B White (L)

C Red (R)

!Press REC MODE to select the recording mode.

!In stop mode, use INPUT SELECT to select the input channel AV3.

!Start the playback on the external device.

!Press REC at the point where you want to begin recording.

!Press PAUSE to pause recording. Press the button to resume recording.

!Press STOP to stop recording.

This unit cannot record signals from PCs.

Recording of bilingual programmes:

RAM If [M1] and [M2] are selected on the connected device, you can choose the audio mode during playback.

-R-RW(V) +R Select [M1] or [M2] on the connected device. You cannot select the audio mode during playback. If the output signal of the external device is an NTSC signal, set the TV system in the SETUP menu to [NTSC].

32