Samsung 700Z5C Using the TPM Security Device, Initializing the TPM chip, Optional, Security TPM

Using the TPM Security Device

Initializing the TPM chip

(Optional)

2	If the BIOS screen appears, select the
	Coniguration item and press Enter.

Chapter 3. 72

Using the computer

Security > TPM

When you use the TPM function for the irst time or you want to
					Aptio Setup Utility
register the user again, you have to initialize the TPM chip.
				SysInfo	Advanced				Security		Bo
			Supervisor Password					Clear
			User Password					Clear
• Initializing the TPM chip erases all authentication			HDD Password					Clear
information saved on the TPM chip. Any decision to			Set Supervisor Password					[Enter]
initialize must be taken carefully.			Set User Password					[Enter]
			Set HDD Password					[Enter]
• To initialize the TPM chip again while the TPM function is			Password on Boot					[Enabled]
in use, you have to decrypt any existing iles and folders			▶ TPM Conguration
encrypted by the TPM function irst. Otherwise, you
will not be able to access the iles and folders after re-
initialization.	3	Set the TPM Support item to Enabled and set the Change
1 Restart the computer.		TPM Status to Clear.
When the Samsung logo screen appears, press the F2 key
					Aptio	Setup Utility
repeatedly.							Security
					TPM Coniguration
				TPM Support		[Enabled]
				Change TPM Status		[	No Change			]
				Security Chip State			Disabled and Deactivated
							No Change
							Clear
							Enable		and Activate
							Disable and Deactivate

4 Press the F10 key to save the changes.