Setu
p
Client Monito
r
The Thin Client Setup Wizard is executed when a thin client is installed for the first time, data are not
backed up after update, or the Reset the terminal to factory default settings check box is checked on
Control Panel -> System. The Thin Client Setup Wizard helps configure basic settings. The procedure
for this is as follows:
When starting the system for the first time, the Thin Client Setup Wizard is launched as shown
below. If Next is not clicked during the 15 second countdown after the first 30 seconds, all
settings are configured to the factory defaults and the setup wizard is exited.
When entering a terminal name and clicking on Network Properties, the Network Manager
dialog box is displayed. This dialog box shows a list of adapters installed on your terminal. You
can change the properties of an adaptor, such as the IP address and name server, by clicking on
Properties.
Click Next to proceed to the next step.