Samsung AK68-01765A user manual Rear Panel, Audio OUT Jacks

getting started

Rear Panel

4

1 2 3

1.AUDIO OUT JACKS

Use audio cables to connect to the Audio input jacks of your television or audio/video receiver

2.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

3.COMPONENT VIDEO OUT JACKS

-Use these jacks if you have a TV with Component

Video in jacks. These jacks provide PR, PB and Y video.

-If P-SCAN (480p) is set to “ON” in Video Output of the Setup Menu, progressive scan mode will work.

-If I-SCAN (480i) is set to “ON” in Video Output of the Setup Menu, interlaced scan mode will work.

Note

4.DIGITAL AUDIO OUT JACKS

-Use either an coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use a coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-See pages 47 ~ 48 to get more information on how to use the setup menu.

10_ getting started