connections
Connecting to a TV (Video)
1
Using Video/Audio cables, connect the VIDEO (yellow)/ AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.
2
Turn on your DVD player and TV.
3
Press the input selector button on your TV remote control until the Video signal from the DVD player appears on the TV screen.
Note
WHITE
RED
YELLOW
Video
Cable
Audio
Cable
RED | WHITE | YELLOW |
|
|
-Noise may be generated if the audio cable placed too close to the power cable.
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
-The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of your TV.
-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD player.
