Samsung AK68-01765A user manual Firmware upgrade, Introduction, How to make an upgrade disc

reference

Firmware upgrade	2. Press the √/® buttons to select Total, then
	press the ENTER button.
Introduction

●

Upgrading the Firmware will keep your DVD player up to date.

The latest firmware version for this unit is provided on the Samsung Website.(www.samsung.com).

How to make an upgrade disc

You must burn the latest firmware version onto a blank CD-R or CD-RW disc:

1.You have to download a new file through Samsung's Download Center. (www.samsung.com).

2.Write the file to Disc using the CD-RW drive of your computer.

Note

The CD should be burned following specs below.

-File System CD-ROM ISO Level.

-Character set ISO 9660.

-The burned CD has to be Finalized.

-Please burn the CD at a low speed.

Upgrade procedure

1.Open the disc tray of your DVD-P191.

Place the burned disc on the tray. Close the tray. The Firmware upgrade screen will appear.

Firmware upgrade

menu appears

Firmware upgrade starts

-During the firmware upgrade process, the tray will open.

Please remove the disc and wait for about 2 minutes.

-If the DVD player was successfully updated, the disc tray will close and the unit will turn off and on.

When the unit turns on, the Select Menu Language screen will appear.

3.Press the π/† buttons to select the desired language.

English

Français

Deutsch

Español

Italiano

Nederlands

Note

-If the “Select Menu Language” doesn’t appear, please contact Samsung Customer Service. (see page 54)

-Do not press any button or unplug the power cord during the upgrade.

-The upgrade procedure may change, refer to the web site (www.samsung.com).

REFERENCE

English _51